REX RG-RH Скачать руководство пользователя страница 9

Страница: 9 / 18

- 7 -

4. Setting Up

Replacing the Roller Set (Figs. 5, 6)

Replacing the Main Shaft

Removing the rollers

Installing the rollers

(Apply the above procedures in reverse)

Code No.

Name

Mark

For use with

1"-1

1/2

" Main Shaft

None

1"-1

1/2

Table 3 Main Shaft

341141

Main shaft

Main shaft nut

Bolt

Bearing plate

Push

Fig. 8

Fig. 5

Fig. 6

1) Loosen the bolts and turn the safety cover

clockwise. (Figs. 5, 6)

2) Remove the upper roller by loosening the fitting

screws on the upper roller and pulling out the
roller shaft. (Fig. 6)

3) Pull out the lower roller by loosening the

hexagonal nut on the main shaft and removing
the washer. (Fig. 7)

1) Match the key on the roller shaft with the key

groove in the upper roller and firmly lock with the
fitting screw.

2) Insert the lower roller into the main shaft, and

firmly lock with the hexagonal nut.

3) Replace the safety cover and tighten the screws.

* Before setting up, clean the inside surface of the

roller and the shaft of waste. Apply grease to the
entire circumference of the upper roller shaft and
the inside surface of the lower roller.

* Be sure to change the upper/lower rollers as a set.

1) Remove the rollers in the order above.
2) Loosen the fixing screw on the main shaft nut, turn

the nut anti-clockwise and remove from the main
shaft.

3) Press the main shaft and remove from the main

body.

4) Installation: Insert the main shaft into the main

body. Then screw in the main shaft nut as far as it
will go and tighten the fixing screw. Bearing plate,
then tighten it firmly with the 4 bolts.

㧍

CAUTION

㨯

Clean the main shaft thoroughly with a cloth

before setting up.

Avoid letting iron powder or foreign bodies

get inside the main unit, as this will damage
the machine.

Fig. 7

Fixing screw

Содержание RG-RH



















Результаты поиска

Содержание RG-RH

Отзывы:

Похожие инструкции для RG-RH

Бренды по названию

Популярные бренды

REX RG-RH, Руководство по эксплуатации

Результаты поиска

Содержание RG-RH

Отзывы:

Похожие инструкции для RG-RH

Бренды по названию

Популярные бренды