REX OL 350-S, Руководство пользователя

Страница: 7 / 21

General information
7
www.monolith-support.com
IRE
AFTER SALES SUPPORT
GB
GB
IRE
00 800 79 333 900
A3 Laminator
General information
Reading and storing the user manual
This user manual accompanies this A3 laminator. It contains important
information on start-up and handling.
For improved readability, the A3 laminator will be referred to only as the
“laminator” below.
Before using the laminator, read the user manual carefully. This particularly applies
for the safety notes. Failure to heed this user manual may result in severe injury or
damage to the laminator.
The instruction manual is based on the standards and rules in force in the European
Union. When abroad, you must also observe country-specific guidelines and laws.
Store the user manual for future use. Make sure to include this user manual when
passing the laminator on to third parties.
Explanation of symbols
The following symbols and signal words are used in this user manual, on the
laminator or on the packaging.
WARNING!
This signal symbol / word designates a hazard with
moderate risk, which may result in death or severe
injury if not avoided.
NOTICE!
This signal word warns of possible damage to
property.
This symbol provides you with useful additional information on
handling and use.
Declaration of Conformity (see chapter “Declaration of Conformity”):
Products labelled with this symbol meet all applicable provisions of
the European Economic Area.
The certified safety seal (GS mark) certifies that a product meets
the requirements of the German Product Safety Act (ProdSG). The
GS mark indicates that the safety and health of the user will not be
jeopardised providing the product is used properly, but also in case
of foreseeable misuse. This is a voluntary safety mark issued by TÜV
Rheinland.