REX OL 350-S, Руководство пользователя

Страница: 9 / 21

Safety
9
www.monolith-support.com
IRE
AFTER SALES SUPPORT
GB
GB
IRE
00 800 79 333 900
A3 Laminator
− Plug adapters or extension cords must also be equipped with
a protective conductor.
− Only connect the laminator to an easily accessible socket so
that you can quickly disconnect it from the mains in case of a
failure.
− Do not operate the laminator if it is visibly damaged or if the
mains cord or mains plug is defective.
− If the mains cord of the laminator is damaged, the manu-
facturer, its customer service team or a person with similar
qualifications must replace it.
− Do not open the housing; instead, have a qualified pro-
fessional perform the repairs. Contact the service address
provided on the warranty card. Liability and warranty claims
are waived in the event of repairs or conversions performed
by the user, improper connection of the device or incorrect
operation.
− Only parts that comply with the original device data may be
used for repairs. Electrical and mechanical parts, which are
essential for providing protection against sources of danger,
are located in this laminator.
− Do not operate the laminator with an external timer or
separate telecontrol system.
− Do not immerse the laminator or the mains cord or mains plug
in water or other liquids.
− Never touch the mains plug with damp hands.
− Do not perform any other work (such as cleaning) on the lami-
nator while it is operating.
− Never pull the mains plug out of the socket by the mains cord;
instead, always do so by taking hold of the mains plug.
− Never use the mains cord as a carrying handle.
− Keep the laminator, mains plug and mains cord away from
open flames and hot surfaces.
− Lay the mains cord so that it does not pose a tripping hazard.
− Do not kink the mains cord and do not lay it over sharp edges.