Revv Owner’s Manual - 8
Once all your connections are made, move the power switch to the On
position and give the tubes at least one minute to warm up. Now is a great
time to begin setting all controls while we wait. We recommend setting
the master volume and gain controls to the lowest setting or zero (fully
counter clockwise) and all treble, mid and bass controls to the 12 o’clock
positions to begin. Set the standby switch to the Revv (up) position and
you are ready to begin exploring!
Note: Upon power up, you will have noticed that the logo lights up blue
and the clip LED illuminates. The clip LED will turn off after 2-3 seconds
post power up.