Revv Owner’s Manual - 22
Reactive Load
The D20 comes with a built in reactive load to allow you to play without
the need for a speaker cabinet. On the rear of the amplifier there is an
internal load/speaker switch to switch between the speaker cabinet and
the reactive load. Depending on what you need, you can switch between
the two on the fly.
The speaker cabinet does not have to be unplugged when switching to
the reactive load, the switch will bypass the speaker cab and only use the
reactive load or vice versa! So you have full control by simply using the
switch.
Note: If you forget to plug in a speaker cab and run the amplifier without a
speaker cab fear not! The D20 automatically uses the reactive load if
there is no speaker plugged into the amplifier.
But be aware, if there is a
cable plugged into the speaker jack on the D20 but no speaker cab
plugged into the other end of the cable, this will cause damage unless
the reactive load is engaged by using the internal load switch!
8.0