REVV D20, Руководство пользователя, Страница: 4 / 25

Revv Owner’s Manual - 4
safety instructions & warnings
read before connecting
1.0
1.1
2.0
3.0
4.0
4.1
5.0
5.1
6.0
7.0
8.0
intro
— safety instructions & warnings
— set up & power up
— front panel layout
— rear panel layout
— tubes & bias
— bias chart for D20
—
MIDI
— CC Commands
— balanced out - XLR
— USB
— reactive load
warranty
— 2
— 4-6
— 7-8
— 9-11
— 12-14
— 15-16
— 16
—
17
— 18-19
— 20
— 21
— 22
— 24
• Do not store or operate the amplifier in
damp/wet areas.
• Do not keep items that contain liquid on
or near the amplifier
• Allow for 4-6 inches of space around
the unit when operating. This unit
produces heat and should be kept away
from flammable items/objects.
• Never obstruct the heat vent when the
unit is powered on.
• Do not expose the amplifier to high
temperature, keep away from radiators
or heat producing/supplying items.
• Be sure to connect to an AC power
supply that meets the power supply
specifications listed on the rear of the
unit.
• Do not use an AC power cord that is
damaged, has been pinched, or is miss-
ing prongs. Periodically inspect the
power cord for cuts or signs of stress
especially at the plug and at the point
the cord exits the device.
• Never use a damaged power cord.
• This amplifier must be properly ground-
ed to local standards when being oper-
ated. Do not use 2 pole extension or
power cords to supply power to this
amplifier
This product has been built by the manufacturer in accordance with IEC
62368-1 and left the factory in safe working order. To maintain this condi-
tion and ensure non-risk operation, the user must follow the advice and
warning comments found in the operating instructions. The unit conforms
to Protection Class 1 (protectively earthed). If this product shall be used in
vehicles, ships or aircraft or at altitudes exceeding 2000 m above sea
level, take care of the relevant safety regulations which may exceed the
IEC 62368-1 requirements.
Please read, understand and follow all safety instructions in this manual,
as well as those on the rear panel of the amplifier. These instructions and
warnings must be followed for your safety, and also to ensure that the am-
plifier will serve you for many years. Please use common sense when
operating, this is a professional instrument designed for electric guitar am-
plification, and should only be used with electric guitar signals.
1.0