Revox Re:system M10, Руководство пользователя

Страница: 24 / 40

M10 Re:system
22
Page

TCP/IP
The second page in the UDP/IP setup
is responsible for all the UDP
settings. Here, all the relevant
settings for the UDP address and port
are made, as well as the selection of
the M-Text modes.
The new settings are confirmed with
the Apply softkey. Otherwise the
previous setting is retained.
UDP/IP Address

[ ]
UDP/IP address:
Here you can enter the target address,
if the UDP packet should only be sent to
one specific recipient.
Using the setting 255.255.255.255 the
data packet is sent in Broad-cast mode
to all who have opened the UDP/IP port
defined below, e.g. 04032.
UDP/IP Port
In order to ensure data security, not
all ports are available but only those
listed below. These have been
defined by Revox.
- TCP/IP via Telnet Port 23
(for testing purposes)
Open ports:
- TCP/IP via Port 5524
- UDP/IP for M-Text commands via
Ports 4032,
5524 , 6536, 7728, 8728,
10308, 18042, 24022, 27944, 31286