Operating manual
Revox Joy App S232
5
Operation
Start the App on your iDevice. After a
short Welcome view, you will see a
Device List, showing all the Revox Joy
products found in the network.
Switching on through the App
The factory setting for the name that will
be shown for a Revox Joy in the Device
List is "S119" or "S120". You can modify
this name under
Basic settings -
Network - Network name ID
to meet
your individual requirements, e.g.
"Lounge".
There is a Power status icon shown next
to each Revox Joy.
If the icon is green, that indicates that
the Revox Joy is switched on. If the icon
is red, that indicates that the Revox Joy
is in standby mode.
Please be aware that the device cannot
be operated through the App if it is in
standby mode.
You can press on the icon with your
finger and modify the Revox Joy Power
status to your requirements.
An additional text is displayed during the
startup or shutdown process, e.g.
"Shutting down...".
If you call the Device List using the
bottom lefthand button, it can take a few
seconds until a search has been
completed over the whole network.
This state is indicated by a greyed-out
page.
Source selection
You will see a list of all the Revox Joy
sources below the name of the device
(in this example "Konferenzraum"),
starting with "Internet Radio". If the list is
not displayed, tap on the name of the
Revox Joy in the Device List. In the case
of the inputs for the traditional sources
(local inputs), you will see either the
default name or if you have renamed the
source under
Local inputs - Rename
inputs
, you will see the corresponding
alias (in this example CD instead of
Coax-1).
