Operating manual
Revox Joy App S232
19
Network
One of the most important menus when
configuring the Revox Joy is the menu
for the Network settings.
The Joy is factory-set for Plug&Play
recognition in the network using DHCP
through the LAN.
Network status
Information about the network status of
the Joy can be called up through this
menu item. You will see whether the
connection is done using LAN or Wi-Fi,
along with the IP address, the Subnet
mask, the Gateway and the MAC
address.
Network name
Through this menu option, you can
define the name the Joy device should
have in the network. This could, for
example, be the name of the room where
it is located, e.g. "Lounge".
The entry can be updated with the
"Done" key on the keypad or with "Apply".
Please note that the App has to be
restarted for the name to appear
correctly in the Device list.
IP settings
This menu option allows you to choose
between automatic and static IP address
assignment. The recommendation from
Revox is, if possible, to leave the setting
at DHCP and not to assign a static IP
address.
If you switch DHCP off using the slider,
individual addresses can be defined.
Please note that all entries, particularly
the DNS addresses have to be set
correctly.
The addresses are implemented with
"Apply". Then a message is displayed
telling you that the Joy will not be visible
in the network for a time. Once this
message has been confirmed, the
network is restarted.
Once the new Device list appears, the
Joy can be accessed under its new
address.
An icon for hiding the keypad is located
in the top righthand corner of this menu.
