Operating manual
Revox Joy App S232
3
Welcome
With Version 2.x of the S232 App, most of
the control and configuration functions
for Revox Joy products can be done
through an iPod touch, iPhone or iPad
(referred to here as iDevices).
Installation
Download the S232 App onto your
iDevice from the Apple App Store. Revox
offers one App that works with an
iPhone, an iPod touch and an iPad.
The App has been developed for
iDevices running under iOS 5 or higher.
iDevices that don't meet that
requirement may experience functional
limitations to a greater or a lesser
degree.
Scope of function
Version 1.x of the S232 App offers the
options of switching a Revox Joy on and
off and of selecting a source.
A search can be made on further pages
in the "
Internet Radio
", "
Music Server
",
"
USB
" and "
iPod
" sources as well as in
the "
My Music
" and "
Last listened to
"
archives. Once a selection has been
made, the App switches to the Play view,
where further control commands can be
sent from.
In the case of local sources, the
selection of the corresponding source
can be made using the alias assigned in
the Joy. The volume can be controlled in
the Play view.
The complete configuration of the Revox
Joy is possible with the Version 2.x.
Pre-requirements
The Revox Joy must have software
>= Version 1.4 installed, in order to use
the S232 App in Version 1.x. For the S232
App with Version 2.x the Joy software 1.7
is required. In any case we recommend
the software version 1.7.
The Revox Joy must be in Quickstart
mode, in order to be able start it using
the App. You can configure this mode
with the remote control under
Basic
settings - Network
.
Alternatively, you can also call this mode
using the "Start Up" button on the back of
the device.
The Revox Joy can be started up from
standby within 3 seconds, if the
Quickstart mode is activated. This
increases the power consumption
compared to standby mode. You will find
details about this in the Revox Joy
Operating manual.
If you want to benefit from the reduced
power consumption of the Revox Joy
standby mode and still want to operate
the device with the S232 App, the Joy
must be switched on using the S208
remote control first.
A reliable WLAN connection must exist
between the iDevice and the Revox Joy
to ensure stable communication
between the App and the Revox Joy.
