18
EN
18
EN
To create a new cooking program press the button and on display will appear “P01”, acting on
+ / - button you go to the program number desired + press the cooking program button for
confirmation.
Now the oven will be in position of first cooking cycle (N. 1 led will be on) and you can select
the time, temperature and steam in the various phases as below:
Select the temperature button and with +/- introduce the value d press the the
temperature button for confirmation
Select the time button and with +/- introduce the value d press the the time
button for confirmation
Select the Steam button and with +/- introduce the value d press the the Steam
button for confirmation
Select the cooking cycle button to go at second phase (in case the cooking process as
different phases) and you will see the Cooking cycle led on under N. 2. Now you can settle
the time, temperature, steam as previously describe and go to “cooking cycle” N. 3. If you
have 3 phases then introduce time, temperature, steam and wait 5 seconds at the end for
automatic memorization. In case you have only 1 or 2 phases on the new phase leave “0”
under time and wait 5 seconds for memorization.
When
program is memorized you can press START/STOP to activate the cooking
process.
The oven will start to pre-heat and after “beep” will be ready to load the food. After
introduced the food will start the program settled, the PHASES led always shows the current
program phase.
END
flashes on the display at the end of a cooking cycle, fan, humidifying and heating
stop and it beeps for 40 seconds.
It is permitted to modify program data is loaded before baking and cooking in execution, to
adapt cooking product needs.
For manual cooking cycle, all changes made before or during cooking are impermanent, i.e.
are not persisted: If you bring the unit into Standby and then back in ON the manual cycle is
reset to default values.
Time of changes that were made during the cooking stage are valid only for cooking.
RETURN TO MANUAL COOKING
To go back to MANUAL you have to follow the procedure below to exit programs:
Press Cooking program button until MANU (manual) will appear on the display. Wait 5
seconds to confirm selection.
TIME ON DISPLAY
When the oven started the cooking program the time display will show the countdown.
In case you use “INF” time the oven will show the count-up of cooking time.
POWER FAILURE
In case of power failure during the cooking cycle, the oven turns in OFF position.
SIGNALS AND ALARMS
All alarms are indicated by a buzzer. The buzzer can be silenced by pressing a key.
Err = CHAMBER PROBE ALARM:
This is triggered if the chamber probe fails.
