Revolabs SOLO EXECUTIVE 01-EXESYS, Инструкция по установке и эксплуатации

Страница: 16 / 20

14
14 14
14
Revolabs Solo™ Executive System Functions
The following table shows the functions supported by the Revolabs Solo™ Executive System:
Function
Base
Station
Status
Wireless
Microphone
Status
Action
Enter Pairing Mode
On Off
Press the Microphone MUTE button for about 7 seconds (LED solid
RED), and then press the MUTE button on the Charger Base for
about 7 seconds (LED solid RED).
Mute
On On
A short press of the Microphone MUTE button or Charger Base MUTE
button causes flashing RED LED on each unit indicating that the
Microphone has audio muted. Pressing either
MUTE button again will
un-mute Microphone (flashing GREEN LED on each unit).
Turn Off Microphones
On On
Press and hold the Microphone MUTE button for about 10 seconds,
until the LED stays solid RED, and then release.
Or
Dock the Microphone into the Charge Base for less than 2 seconds.
Turn On Microphones
Off Off
Press and hold the Microphone MUTE button for about 3 seconds,
until the LED shows solid GREEN.
Or
Dock the Microphone into the Charge Base for at least 4 seconds.