2
Industry Canada Notice to Users
Operation is subject to the following two conditions: (1) This device
may not cause interference and (2) This device must accept any
interference, including interference that may cause undesired
operation of the device Ref IC: RSS 210 Sec. 5.11. The term “IC:”
before the certification/registration number only signifies that
registration was performed based on a Declaration of Conformity
indicating that Industry Canada technical specifications were met.
It does not imply that Industry Canada approved the equipment.
See Ref IC Self-Marking 6(f) and RSP-100 Sec. 4.
IC ID Number: 6455A-02DSKSYS
solo Desktop Charger
IC ID Number: 6455A-01EXEMIC
solo Desktop Microphone
Restricted use with certain medical devices
Hearing Aids
Some devices may interfere with some hearing aids. In the event
of such interference, you may want to consult with your hearing aid
manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately
shielded from RF energy. Your physician may be able to assist you
in obtaining this information.
Export Law Assurances
This product is controlled under the export regulations of the
United States of America and Canada. The Governments of the
United States of America and Canada may restrict the exportation
or re-exportation of this product to certain destinations. For further
information contact the U.S. Department of Commerce or the
Canadian Department of Foreign Affairs and International Trade.
The use of wireless devices and their accessories may be
prohibited or restricted in certain areas. Always obey the laws and
regulations on the use of these products.
02-DSKSYS North America UPCS Usage Restriction
Due to the UPCS frequencies used, this product is licensed for
operation only in the United States of America and Canada.
15
Using with a solo Executive System
The solo Desktop Microphone can be paired to a solo Executive
Wireless Microphone System for users who wish to have a single
microphone to use in both the office and in the conference room.
This is accomplished by pairing the Desktop Microphone to the
Executive Base Station and docking the Microphone in the
Executive Charger Base. The Microphone can then be used in
either system by placing the Microphone in the respective Charger
for about 5 seconds.
