8
solo Wireless Microphone
The wireless personal microphone is synchronized to the Charger
Base and can be worn on the user’s shirt pocket, lapel or on a
lanyard. It provides high quality full duplex audio between the user
and the computer and/or phone system. The system allows the
wearer to step out of the office or conference room and still
participate in the call.
1. Pocket Clip — attaches microphone to the user
2. LED Indicator — provides visual indicator of microphone status
3.
Mute
Button — controls multiple microphone functions
4. Earpiece Jack — accepts the 2.5mm plug for the earpiece
5. Charging Port — accepts the storage base battery charger
Charging the Batteries
How to Charge
1. Place the Microphone into the Desktop Charger Base.
2. During charging, the Microphone status LED indicator is solid
RED and remains on until charging completes and then turns
off. The Charger Base status indicator remains off during
charging. The Microphone is always muted while in the
Charger Base. The battery charges from fully depleted to fully
charged in about two hours. It can be “quick-charged” to
approximately 80% capacity in 45 minutes.
3. When charging completes, the Microphone RED LED turns off
and Microphone is ready for use.
Note:
A fully charged
battery provides approximately 8 hours of talk time.
4.
If the Microphone is left in the Charger Base for an extended
period, the LED will turn on again indicating a top-up charge.
3
5
4
2
1
9
When to Charge
First-time use — before you can use the Microphone, charge it for
8 hours or overnight in the Charger Base (until microphone LED
turns off).
Recharging — when the Microphone LED begins flashing
alternating YELLOW and RED or YELLOW and GREEN, the
battery needs recharging. Over time (years), batteries gradually
wear down and require charging after a shorter period of use. This
is normal.
The Lithium Polymer rechargeable battery that powers the
Microphone is not user serviceable. Please see the Revolabs
Knowledge Base website area (
www.revolabs.com
) for
replacement instructions and to assure that the proper disposal
method is used.
Warning: Never dispose of batteries in a fire
because they may explode.
Using the Microphone
1. Remove the Microphone from the Charger Base. The
Microphone turns on and mutes automatically when removed
from Charger Base (flashing RED LED).
2. The Wireless Microphone has a clip on the back which allows
the Microphone to be easily clipped onto a shirt pocket, blouse
or lapel. The Microphone can also be clipped on to a lanyard
and be worn around the neck. Attach the Microphone as close
to the mouth as possible (within 6 - 12 inches is
recommended).
3. With the Microphone in the wearing position, un-mute the
Microphone by pressing and releasing the
MUTE
button
(confirm by viewing the flashing GREEN LED on both the
Microphone and Charger Base).
4. To turn off the Microphone, return it to the Charger Base. You
may also turn it off manually by pressing and holding the
MUTE
button for approximately10 seconds until the LED turns solid
RED and then releasing the mute button.
5. If the Microphone is moved out of range of the Charger Base
(~65 feet) the connection will be dropped and the Microphone
will mute (LED flashes alternating RED, YELLOW and
GREEN). After 15 seconds the microphone will beep 5 times,
and will continue beeping every 30 seconds to remind the user
