39
Wireless NVR Kit Manual
Operation explanation
：
：
Control the PTZ upward movement.
：
Control the PTZ downward movement.
：
Control the PTZ move to the left.
：
Control the PTZ move to the right.
：
Control PTZ automatic circular motion
+
：
Adjust the zoom +, focal , ap.
-
：
Adjust the magnification -, the focal length -, the aperture -.
4.5.3 PTZ automatic cruise setup
Steps
：
1, Right click in the main interface, in the shortcut menu, select the system setup, and then select the PTZ setup in the
channel setup.
2, Click on the right side of the preset "?" button to enter the control interface, set the preset point.
3, Select the preset position and set the direction.
4, Right-click to return to the setup interface, set to hold time.
5, Click the New button to complete a preset point of the setup.
6, Repeat the above steps 2-5 by setting the other preset points.
7, After setup, check the cruise and start checking boxes and change the pan / tilt speed as needed. As shown below:
8, Right click to return to the setup interface and click the Apply button to save the setups.
