10
Wireless NVR Kit Manual
connect the NVR to the IPC with the cable. Right click on the mouse -> click on adding camera-> delete all channels
(Note: if one or more channels, can click the channel(s) and click delete to delete the specified channel(s)) -> code
matching -> "start code matching?" Click Yes -> Show "on the code matching" -> NVR monitor screen shows that
the success of the code matching (note: more than one camera can match at the same time). If notified the code
matching fails, click "Refresh". If there is no indication that any network cable is bad, please re-connect to the code
matching operation. -> disconnect the network cable to see if the screen is normal, the screen normal means that the
wireless camera was added successfully -> when all the wireless camera added to the NVR means that the
preparatory work is completed. (Figure 5.1, Figure 5.2, Figure 5.3, Figure 5.4)
2
、
Make sure the wireless NVR kit is working properly
Power the NVR and connect to monitor, all the IPC are installed around the NVR (Note: need to connect the
antennas on every IPC), power all the IPC, when all the IPC video show on the NVR monitor, that means the kit is
working properly and can be installed to a predetermined location.
