Revo R322, Оригинальное руководство пользователя

Страница: 3 / 28

3
R322 DRILL - W18XC473 - Revised 231111
MACHINE SPECIFICATION
REVO - R322 DRILL
Machine Height 305mm (slide in down position)
Machine Width 120mm (without handles)
Machine Depth 275mm
Stroke 156mm
Machine Weight 12.0kg (tool and detachable parts)
Rated Motor Power 850W
Voltage 110V / 230V AC
Rated Current 7.8A / 3.7A
IP Rating IP20
Spindle Speed - load 390 /min (depends on cutter size and feed rate)
Spindle Speed - n
0
690 /min
No. of speeds Single Speed
FWD/REV No
Power Cord Length 2.5m
Insulation Class CLASS I
Annular Cutter Capacity Ø32mm
Standard Cutting Depth
25mm (50mm with optional long Arbor)
Twist Drill Capacity Ø13mm
Tapping Capacity N/A
Countersink Yes
Chuck Type
3/4” Weldon Shank Arbor or 13mm Chuck
Spindle Fitting
1/2” x 20 UN
Magnet Dimensions 160mm x 85mm
Magnet Power 50W
Magnetic Adhesion 1000kg (measured on 25mm thick plate)
Minimum Plate Thickness 10mm (minimum recommended)
Sound Pressure Level 88 dBA Uncertainty 3 dBA
Sound Power Level 101 dBA Uncertainty 3 dBA
SPL at Operators Head 92 dBA (1.55m high x 1m distance) Uncertainty 3 dBA
Hand-arm Vibration Less than 2.5 m/s
2
Uncertainty 1.5m/s
2
.
The vibration measurement was made under standard conditions in accordance with the
requirements of BS EN 60129-1:2009.
The actual vibration level during use will depend on the workpiece stability/rigidity and the
condition of the cutter used. These factors may increase the vibration experienced by the
operator, each individual application of the tool should be assessed for the effect of these
application variable factors, before exposure.
.