64
Advanced functions
Setting alarm time
You cannot operate the alarm function until the correct time has been set. Depending on the configuration , this happens
automatically or must be set manually. The time can be updated either manually, via DAB/FM or the internet.
Select one of the alarm time memories
Alarm 1
or
Alarm 2
with the
or
buttons and confirm with
SELECT
.
Alternatively:
>
Press the
ALARM
button on the device to directly start the alarm configuration.
>
Then go through all the points one by one. Confirm each entry with the
SELECT
button.
Repeat
You can choose between
Daily
(every day of the week),
Once
,
Weekdays
(Mon - Fri) or
Weekend
(Sat and Sun). Press the
SELECT
button to confirm the settings.
Time
Here you can enter the alarm time and, if necessary, the date.
>
First select the hours with the
/
buttons and press the
SELECT
button to accept.
Then the minutes are entered. Adopt these changes with the
SELECT
button as well.
If
Repeat
> [Once]
was selected, you must enter the date as well as the time.
Mode
Then enter the source. The options are
BUZZER
,
Internet Radio
,
DAB+
or
FM
.
Press the
SELECT
button to accept the setting.
Programme
If you have selected Internet Radio, DAB+ or FM, you can then specify whether you want to wake up to the station you were
listening to last, or one from your favourites list.
Volume
Use the
/
buttons to select the volume at which you want to be woken up.
Save
Press the
SELECT
button to save the alarm.
The alarm is active as soon as you have set the alarm repeat to Daily, Once, Weekend, or Weekdays.
An alarm clock symbol with the corresponding digit of the active alarm then appears in the status bar.
Switching off alarm clock after alarm
Press the
On/Standby
button to turn the alarm off.
Super_Connect_Stereo_DE_EN_FR_NL_10_2022_V3_new RCU_new Layout.indd 64
Super_Connect_Stereo_DE_EN_FR_NL_10_2022_V3_new RCU_new Layout.indd 64
12.10.2022 09:27:23
12.10.2022 09:27:23
