32
33
j Press the (+) Intensity Control once to start
stimulation.
Continue to increase the intensity until you feel
a strong but comfortable tingling sensation without
it causing you pain. You can set the intensity between
1-99.
You can use the buttons on the device or
remote
control.
Press the (+) button to increase the level.
Press the (–) button to decrease the level.
If you feel pain or discomfort:
• Lower the intensity of the Body Pads using the (–)
Intensity Control on the device or remote control.
• You can also choose to stop therapy before the end of
the 30 minute session to avoid skin irritation. You can do
this by pressing the power button on the device or on
the remote control.
k The Time display will start to count down in
minutes as REVITIVE cycles through its program.
When REVITIVE times out, you will hear three beeps,
and the device will switch itself off automatically.
l
Ensuring that the device has switched itself off, then
gently peel the Body Pads from the skin.
Do not pull the Body Pads off the skin using the
Electrode cords as this may damage the cords.
R
R
R
R
R
Instructions for use
m
Replace the Body Pads onto their plastic liner after use.
n
Unplug the Electrode cord from the opening on
REVITIVE.
You do not need to detach the Body Pads from the
Electrode cord.
R
R
R
R
R
Step 5.3:
Switching between EMS and TENS mode
To change between EMS and TENS mode,
press the button of the stimulation mode
you require on the remote control.
During use, switching from EMS to TENS
mode (or vice versa), will reset the timer back
to 30 minutes. The intensity will also be
reset
to
zero.
EN
EN
4397_IFU02_16220241.indd 32-33
25/01/2019 14:51
