26
27
j Press the (+) Intensity Control, one time, to start
stimulation.
You can use the buttons on the device or remote control.
Press the (+) button to increase the level.
Press the (–) button to decrease the level.
k Ensure you familiarise yourself with the feeling of
Electrical Muscle Stimulation (EMS). Use on a low
intensity for 20 minutes once per day for a few days.
Set the intensity at a level where you can feel the
stimulation in your feet which creates a calf contraction.
This will likely be less than intensity 40.
It is normal to feel tingling or varying sensations in
your muscles you are treating.
l After a few days of familiarisation, use a higher intensity
that provides you with strong but comfortable muscle
contractions.
Most people experience a strong contraction at intensity
level 40 or over. You can set the intensity
between 1-99.
Adjusting the intensity level - At the start of therapy there will be 30 seconds of
stimulation to help you set the right intensity level. This is followed by a rest period of
30 seconds, when you will feel no stimulation.
For the remainder of the therapy session you will feel 10 seconds of stimulation,
followed by a 20 second rest period which repeats until the end of therapy.
Adjust the intensity when you can feel the stimulation being applied to your thigh.
It is not possible to adjust the intensity during the rest period.
Please note that the intensity required may vary from day
to day.
m
The time control/display will start to count down in
minutes as REVITIVE cycles through its program.
n When REVITIVE times out, the time display reads 00 and
you will hear three beeps.
o
REVITIVE switches itself off automatically.
p
Ensuring that the device has switched itself off, then
gently peel the Arthritis Pads from the skin.
Do not pull the Arthritis Pads off the skin using the
Electrode cords as this may damage the cords.
Instructions for use
If you feel pain or discomfort:
• lower the intensity of the Arthritis Pads using either the (–)
Intensity Control on the control panel of the device or on the remote
control.
• You can also choose to stop therapy before the end of the 20 minute
session to avoid muscle fatigue. You can do this by pressing the
power button on the device or on the remote control.
EN
EN
4397_IFU02_16220241.indd 27
25/01/2019 14:51
