31
English
7. FEATURES OF THE REVIERMANAGER APP
This chapter contains some information about the features of the
Reviermanager application. These features are only available in the camera
when it is connected to the mobile network over SETUP and then turned
to ON (see point 5. „INITIAL START-UP OF THE CAMERA“ and point 6.
„ACTIVATE YOUR APP Account“.
1. Pictures/trigger:
The default setting 3 pictures per trigger are saved
onto the SD card. It is possible to change this setting (1 to 10 pictures
per trigger). The first picture is transferred to the app. The other pictures
won´t be sent but only be saved to the SD card.
2. Trigger interval:
The camera takes a picture about every 10 minutes
on movement and sends it to the Reviermanager application.
With an activated premium-license you can set/reduce the trigger
interval to about 3 minutes. For more information please visit our website
www.reviermanager.at
.
3. Add camera:
Here you can add more Reviermanager cameras via app
so triggered pictures can be transferred to the gallery. WhenIf the camera
is added, the correct date will bet set.
4. Set position:
You can set the position of the camera when you are near
it. Please note that the camera doesn‘t have a GPS module. Because
of this the Reviermanager needs access to the position of your smart
phone (GPS must be activated on your phone).
5. Trigger photo:
A picture is triggered in the camera manually or over
the Reviermanager app and transferred to the Reviermanager app.
This function kann only be used every 10 minutes (3 minutes with the
premium license).
6. Update camera‘s status:
The camera transfers current information
about battery status, signal strength, firmware version and memory
status of the SD card.
7. Format camera:
If you press this button, all pictures stored on the
RM4_Bedienungsanleitung 06-2021_FSCneu.indd 31
RM4_Bedienungsanleitung 06-2021_FSCneu.indd 31
24.06.2021 13:24:01
24.06.2021 13:24:01
