33
English
2.3. Navigate to „Default“ at the bottom of the submenu
2.4. Confirm with OK. All settings are reset to the default and the internal
memory is deleted.
3. Has the SD card been unlocked (slider is set on the side and not on
LOCK)?
If your SD card is defective, try a new SD card (max. Size: 32GB).
Please do not use Micro SD cards with adapter!
4. Does the camera not dial into cellular network (Error: “login fail”)?
Check if the antenna is mounted tightly to the camera. If the mobile
network sign is too weak there is still the possibility to use an additional
antenna instead of the standard antenna. More informations on this
topic on
www.reviermanager.at.
5. Does the camera display „noSIM“ even though a SIM card has been
inserted into the camera? Take out the SIM card cautiously and clean
the gold contacts with a fine, clean cloth and put the SIM card back
in. Has the antenna been properly installed and are the contacts at the
antenna and onthe antenna socket clean?
6. Does the switch work properly? Does the switch lock between the
positions OFF, SETUP, ON? How to check all functions of the switch:
6.1. - OFF: The display and the red LED are dark.
6.2. - SETUP: The display starts to light up, the red LED on the front of the
camera flashes if there is movement.
6.3. - ON: The display is dark, the red LED on the front of the camera
flashes slowly for 10-15 seconds.
7. Check if the firmware version of the camera is up to date. Go to the
camera overview to do so.
For all questions regarding the Reviermanager camera please contact
support or your retailer. (see point 11 „WARRANTY AND USAGE“).
RM4_Bedienungsanleitung 06-2021_FSCneu.indd 33
RM4_Bedienungsanleitung 06-2021_FSCneu.indd 33
24.06.2021 13:24:01
24.06.2021 13:24:01
