Revere 3SI SMLR-A I Скачать руководство пользователя страница 91 | Manualshive

Страница: 91 / 178

Revere 3SI SMLR-A I Скачать руководство пользователя страница 91

Page 615

Jan 23/18

REPAIR AND SERVICE

MANUAL No.

9112

2.

To paint the container:

•  Remove all loose labels.
•  Remove grease, tar etc. with a suitable solvent, e.g. toluene.
•  Wash the container with a solution of detergent and water and rinse with

clean water.

• Fill any cracks or voids in the gelcoat with GRP filler as per Step 1 above.
• Spray paint one coat of white Polyurethane paint.

D.

Other repairs

1.

Replace damaged or illegible labels. Re-stencil illegible markings.

9. Service Documents

A.

A service record of inflatable liferaft shall be filled up properly after completion of
each service work for a liferaft. Fill in all blanks with no mistakes.

B.

After the completion of the service for a qualified liferaft, a certificate (attached with
the service record) shall be issued in quadruplicate, the original is submitted to the
ship owner, one copy to the administrative organization, one will be kept by the
service station itself for review and one to Revere Survival Inc.

C.

The service record shall be signed by the inspector and the serviceman, while the
certificate shall be signed by the chief of the service station.

«
...
89
90
91
92
93
...
»

Содержание 3SI SMLR-A I



















































































































































































Отзывы:

Нет отзывов