Reverberi SERENA 18 Скачать руководство пользователя страница 79 | Manualshive

Страница: 79 / 99

Reverberi SERENA 18 Скачать руководство пользователя страница 79

SERENA P GB-R04 del 03-07-17

00/Per Bertani/Manuali d’uso Serena/ Serena con stampante

79/99

If the display does not light, check the fuse near the transformer because it could be
burned!

14.1.1 NEW SOFTWARE INSTALLATION

– PROCEDURE

It is recommended to use a new SD card of the same type! The old card must be
downloaded on a PC and stored!

1.  Extract the SD card from the sterilizer
2.  Save the SD card data on your computer
3.  After saving the data, proceed with formatting the SD card (The formatting window must contain FAT 32)
4.  Close the formatting
5.  The new software will be sent by e-mail, so ensure to open the message in your inbox
6.  Save the attachment. A window will open. Save on SD card.
7.

Remove the SD card from the computer and move the small button of the SD card on LOCK

8. With the sterilizer OFF, insert the SD card
9. Turn on the sterilizer, making sure to press the power button once .Wait for the acoustic signals end up

(bip..bip..bip.......pause ......bip...bip...bip) and the display lights up.

10. The display turns on automatically when the machine has loaded the new software
11.

Wait a few minutes before turning off the machine or start a sterilization cycle.

12. To verify the successful update of the software, check directly on the SD card or control the printing of labels
13.

If the software installation is successful, remember to remove from the SD card the LOCK (otherwise the card
will not be recorded data sterilization) or insert a new SD card without LOCK.

14.

For assistance, call 0039 522 875159 from 8 am to 12.30pm.

FORMATTING SD CARD

Warning! By formatting the SD card all presented data will be automatically
deleted.

After entering the SD card to read, highlight the Removable Disk (E:) and by the right bottom highlight to format. show
format

«
...
77
78
79
80
81
...
»

Содержание SERENA 18




































































































Отзывы:

Нет отзывов