SERENA P GB-R04 del 03-07-17
00/Per Bertani/Manuali d’uso Serena/ Serena con stampante
6/99
1 INTRODUCTION
We thank you for choosing a REVERBERI sterilizer.
The User and Maintenance Manual (U.M.M.) has been realized in order to provide general knowledge of the
machine and to give the transport, use and maintenance instructions and all the necessary details for the installation,
for the correct use and for the proper functioning.
We ask you kindly to CAREFULLY readthe manual BEFORE CARRYING OUT ANY OPERATION ON THE
MACHINE.
In caseyou need another copy of the Use and Maintenance Manual (U.M.M.) you are invited to forward your
motivated request to the CONSTRUCTOR, quoting the serial number on the title of this post or on the name plate on
the back of the machine.
1.0 PURPOSE OF THE USER MANUAL AND MAINTENANCE
The following Manual aims to provide user all the information about SERENA 18/23 sterilizers in order to warrant:
the correct installation and implementation of the SERENA 18/23 steam sterilizer.
the optimal use.
a safe and reliable functioning.
the requirements for proper and regular maintenance and for the periodic replacement operations of the
components.
1.1 USER’S PROFILE
The user, who has the responsibility for operation of the equipment, must be a person previously well trained by the
Employer (or whoever takes his place), that person must MANDATORY read/UNDERSTAND all the instructions in this
U.M.M.
The manufacturer is not liable for any direct or indirect damages caused by people who had
used the device without having received adequate instruction and relevant qualifications to
conduct the same and consequently have made bad use.
Three kinds of profiles can use the sterilizer and have to read carefully this Manual:
The Administrator
The administrator is the responsible for the clinic or doctor's office, or rather the person responsible for the protocol of
hygiene and sterilization process.
The administrator is also responsibl
e for the OPERATORS’ training and for the proper operation and maintenance of
the equipment. Must have adequate training for all operations to be performed and for safe use.
The Operators
The operators are those who use the sterilizer according to the instructions received from the ADMINISTRATOR.
Enabled technicians
All the ordinary and extraordinary maintenance, qualified, controls, cleanings and registrations should be performed
only by authorized personnel and/or instructed to do so and when the equipment is not working (state of zero energy).
The qualified personnel must have attended a technical training from the manufacturer. At the end of the course will
receive a certificate of training.
The manufacturer shall make available to operators and technical managers, training at the
headquarters of Bibbiano (RE). For information on course dates contact number.
Tel 0522 875 159.