DIRECTIONS FOR USE
CONCEALED DIGITAL MIXING VALVE RADA SENSE
(VERSION 7203)
:
To adjust the water temperature,, pass your finger in front of the cold water sensitive captor (blue triangle) or in front of the
hot water (red triangle) according to the temperature desired.
Max outlet temperature for bath: 40°C
Max outlet temperature for shower: 38°C
Automatic stop of bath filll after 5 minutes.
Automatic stop of shower after 30 secondes.
Check water temperature before each submersion.
If the bathtub is not equipped with the option "automatic stop of filling", stop water to
10cm approximately below the edge of the tub.
If the bathtub is equipped with the option "automatic stop of filling", it is advised to
carry out a test of the sensor before the filling. (see procedure in this instruction
manual)
CLEANING SHOWER (VERSION 7203)
The shower head can be operated at any time.
Pass the finger in front of the pictogram of the shower head and adjust the flow intensity
with the tap in front of the bath.
Select the desired temperature by adjusting the temperature valve as described above.
The shower head spray can be adjusted from a wide to narrow flow.
After each use, turn off the valve.
11/21
Cold
adjustment
sensor
Warm
adjsutment
sensor
Bath control
Shower control
Service activation
Temperature display
Full cold
