Reva L-ion, Руководство пользователя, Страница: 29 / 106

1.8 SEAT ADJUSTMENTS
Instrument Cluster and Controls
NOTE
Make sure you remove hard or
breakable objects lying in pockets or
clothing, if any, before wearing
seatbelts.
The seatbelt is equipped to be used
by one person only. Never use
seatbelts for more than one occupant
Ensure that the seatbelts straps are
not twisted while in use.
Pregnant woman are recommended
to wear seat belts for protection.
Please consult your doctor for any
specific recommendations.
Never attach the seatbelt over a child
or infant in the occupant’s lap.
Child restraint system:
Children and infants must never be
transported without a proper restraint
system. This system can be
purchased from the market. Ensure
that the system purchased meets all
the applicable standards and safety
measures. Use as per instruction of
the manufacturer while seating the
child in the front seat.
Cleaning the seatbelts:
Never use any harsh detergents to
clean the seatbelts as this may
render them ineffective.
Inspect the seatbelts regularly for
excessive wear and tear. If any
damages/ frays etc are found,
replace the seatbelt immediately.
Do not attempt to tamper the
seatbelts as this may affect the
performance of the seatbelts.
27
1.9 HOOD
I. OPENING THE HOOD
Step 1 : Pull the hood release lever
located beneath dashboard on
right side of steering column.
Step 2: Locate the hood-latch lever
under the middle edge of the
hood with your finger. Pull this
lever until it releases hood.
Step 3 : Lift the hood and pull the hood
support-rod out of its clip and
insert the end into its housing
on the passenger’s side of the
hood.
Instrument Cluster and Controls
II. CLOSING THE HOOD
Step 1 : Lift it up slightly to remove the
support rod.
Step 2 : Put the support rod back into
the holding clip.
Step 3 : Lower the hood till it touches
the fender and press it
lightly.
Do not bang the hood. Ensure
that the hood is fully locked
NOTE
28