Reva L-ion, Руководство пользователя, Страница: 14 / 106

1.3 STEERING WHEEL
II. LOW BEAM / HIGH BEAM
To change between low beam and
high beam, pull the turn signal lever
until you hear a click, then let go. To
flash the high beam, pull the lever
slightly towards you and release it in a
quick action. Flashing the high beam is
necessary at times to warn traffic in
the front about your presence,
especially while overtaking at night.
Instrument Cluster and Controls
III. TURN SIGNALS
The turn signal lights blink when you
signal a lane change or turn.
Turn the side indicator lever upwards
for left turn and downwards for right
turn respectively.
I. HEADLIGHTS
This lever operating the headlights has
three positions. They are:
1. OFF - In this position, all lights are
off.
2. Middle Position - Front parking
lights, tail lights, registration plate
lights and dashboard backlighting
is lit but headlights remain off.
3. Third Position - The headlight also
comes on when the lever is turned
to this position.
OFF OFF
F
O F
13
1.3 STEERING WHEEL
IV. WINDSCREEN WIPER
To operate the windscreen wiper, twist
the lever from OFF position to any of
the operating positions as required.
The speed of the wiper can be varied
to intermittent*, low and high by
operating the lever switch.
To spray windscreen washer fluid, pull
the lever towards you, the wiper will
come ON for a few seconds/ wipes.
Instrument Cluster and Controls
V. HAZARD WARNING
Pull up the switch to activate the
hazard warning lights. All six external
turn signal indicators will flash
simultaneously. To turn off the lights,
push the switch down. These lights
can be used to warn the traffic in the
event of any emergency.
VI. HORN
The horn is integrated in the center
pad of the steering wheel. Press
anywhere on this pad to sound horn.
PU L
L
PU L
L
14
* Applicable model * Applicable model