Returnstar Interactive Tech IQBoard, Руководство пользователя

Страница: 15 / 28

15
/
28
7.4. Hand Gesture Recognition
It is available to set up the value for pen, selection and eraser tool for customization. The
setting window as shown below:
1) Click “Start” and conduct different operation on the surface to set up the value for pen,
selection and erase tool one by one.
2) For the pen tool, please press the surface more than 1 second with one finger. For the
selection tool, please press the surface with two fingers closed more than 1 second. And for
the eraser, please use palm or fist to press the board for more than one second.
3) After the value is set, please try to use one finger, two fingers closed and the palm or fist to
operate. And you could adjust the value if the effect is not good.