Retsch BB50, Руководство пользователя

Страница: 26 / 44

Operating the machine
26
Pos : 9. 23 /0020 Übersc hrift en/1.1 Ü bersc hriften/ 1. 1 Ü berschrif ten BDA/11 M ahl vorgang st art en @ 0\ mod_1227185008190_9. doc x @ 3861 @ 2 @ 1
5.10 Starting the grinding process
Pos : 9. 24 /0005 RET SCH/ 0005 R ETSCH Bedienungsanlei tungen Kapit elsamml ung en/BB50/ 0007 Bedi enung/ 0014 BB50 M odul M ahl vorgang st arten @ 5\ mod_1346050969994_9.doc x @ 34661 @ @ 1
Fig. 19: Start grinding
• Press the START button ( F6 ).
The green LED above the START button lights up. The machine starts up.
Fig. 20: Gap width
• Adjust the gap width as required using the hand wheel ( D ).
You can reduce the gap width ( sw ) with a twist of the hand wheel ( D )
in a clockwise direction .
You can increase the gap width ( sw ) with a twist of the hand wheel ( D )
in an anti-clockwise direction .
The values on the display ( F1 ) specify the gap width in mm. The display accuracy
is ± 0.1mm.
The end of the grinding process may be recognised acoustically by a change in
sound and the machine can be switched off.
Pos : 9. 25 /0020 Übersc hrift en/1.1 Ü bersc hriften/ 1. 1 Ü berschrif ten BDA/11 M ahl vorgang st oppen @ 0\ mod_1226909892231_9. doc x @ 3643 @ 2 @ 1
5.11 Stopping the grinding process
Pos : 9. 26 /0005 RET SCH/ 0005 R ETSCH Bedienungsanlei tungen Kapit elsamml ung en/BB50/ 0007 Bedi enung/ 0015 BB50 M odul M ahl vorgang st oppen @ 5\ mod_1346050970540_9.doc x @ 34672 @ @ 1
NOTICE
Only interrupt the grinding if no more grinding material is in the fill hopper or
crushing chamber.
Mechanical components might be damaged by a blockage when starting up.
• Press the STOP button ( F6 ).
F1
F6
D