Operating the Device
30
7.2 Adjusting the gap width
Fig. 8:
Adjusting the gap width
The gap width can be adjusted as follows:
•
Turn the Jaw Crusher BB 600
off at the main switch (H) (see “
•
Disconnect the machine from the power supply and secure to prevent it restarting.
•
Unscrew the outer lock nuts (DML) and (DMR).
Wrench opening SW 36.
•
Unscrew the middle lock nut (DMM).
Wrench opening SW 30.
•
Screw in the middle screw (DSM), wrench opening SW 30.
Ensure that the spring (E) is tensioned at all times.
•
Insert the desired combination of spacer plates (DB).
The gap will be wider when you remove the spacer plates and will be narrower when you
insert the spacer plates. Also see “
Fig. 9:
Spacer plates
DSM
DML
DMM
DMR
DB
E
