Operating the Device
29
NOTICE
N15.0007
Range of application of the device
Long-term operation
−
This laboratory device has been designed for 8-hour single shift operation.
•
This device must not be used as a production machine or deployed
in continuous operation.
NOTICE
N16.0000
Selection of suitable materials
−
You might be using unsuitable materials.
•
Use the manufacturer’s application database to check whether
your sample material is suitable for use.
7.1 Switching On / Off
NOTICE
The Jaw Crusher BB 600 may only be started up with an empty crushing chamber.
Grinding material placed in the crushing chamber or the feed hopper before starting the
machine will result in a blockage and possibly damage to mechanical components.
The control unit is located on the front of the Jaw Crusher BB 600
, see “
Start the machine as follows:
•
Turn the main switch (H) to the “ON” position and release the emergency stop button (G)
where applicable.
•
Switch the machine on using the green button (F).
The motor is started up and the moving crusher arm is set in motion.
The grinding process can only be started if the drawer on the collecting receptacle (C) (see
“
”) has been completely pushed in. Please ensure that you close and lock the drawer
in order to prevent it slipping out due to vibrations.
When open, a limit switch prevents the machine startin
g (also see (C) in “
NOTICE
Stop the Jaw Crusher BB 600 when there is no longer any grinding material in the
crushing chamber.
Mechanical components may be damaged by a possible blockage.
The control unit is on the front of the Jaw Crusher BB 600
, see “
.
The machine is switched off as follows:
•
Switch the machine off using the red knob (F).
•
Turn the main switch (H)
to the “OFF” position.
In an emergency: the machine is shut down immediately when the emergency stop button (G)
is pressed.
The motor is disconnected from the power supply and the moving crusher arm comes to a halt.
