Hold-o-mat
®
– Operating instructions
47
E
Package contents
Content
The package contains: 1 unit, 2 side rails, 1 set of operating instruc-
tions, 2 power cables (1 x EU/1 x CH). Optional: 1 Core temperature
probe. Check the package contents. If parts are missing, return immedi-
ately to your supplier.
The product has been supplied to you in cardboard packaging. Dispose
of the packaging properly or return it to your supplier.
Damage in transit
Check the unit for visible signs of damage.
Do not use the unit if defective. Report the damage immediately to your
supplier.
Placement requirements
The Hold-o-mat can be used in many different parts of the kitchen, preferably in a central location,
not in a remote corner. Thanks to its ease of installation (no water, drainage or air extraction con-
nections), the unit can be placed anywhere. Ensure, however, that the power supply is 230 V (op-
tional 110 V) / 50/60Hz. If the Hold-o-mat is built-in, sufficient cool air should be allowed to circulate.
The Hold-o-mat does not have to be tied to one location. It can be used in a variety of places such
as the kitchen, lounge, and for parties etc.
If the unit is permanently installed in one place and cannot be disconnected from the mains by a
switch, the plug on the power cable must remain accessible.
– Place the unit on sturdy surface.
– Ambient tempe 10 °C to + 40 °C. Do not place the unit next to
or on top of hot surfaces (radiators or hot plates): there is a
danger of
melting, fire or short circuit!
– Never bring the unit into contact with water or other liquids as there is
a
danger of short-circuit!
– To ensure adequate air circulation, all sides of the unit must be kept a
minimum of 10 mm from walls and other objects
Содержание Hold-o-mat 411
Страница 22: ...22 Hold o mat Instructions de service ...
Страница 42: ...42 Hold o mat Operating instructions ...
