9
10
■
Volume Maximum Function
The Volume Maximum Function can temporarily maximize
the volume level. This function is invalid when the volume lev-
el reaches 31.
1.
Hold
[VOL/SQL]
and press
[
Y
]
to turn on this function.
• The volume will be maximum.
• The rolling indicator strip appears.
2.
Hold
[VOL/SQL]
and press
[
Y
]
ÊÅÊËÈÄÅŮƔ
■
Volume Mute Function
The Volume Mute Function can be activated temporarily. This
function is invalid when the volume level is OF.
1.
Hold
[VOL/SQL]
and press
[
Z
]
to activate.
• The volume is mute.
•
¾»ÌÅÂËû¿Äº¿¹·ÊÅÈÉÊÈ·ÆŲ·É¾»ÉƔ
2.
Hold
[VOL/SQL]
and press
[
Z
]
ÊÅÊËÈÄÅŮƔ
■
Automatic Backlight
The Automatic Backlight Function is convenient for night op-
»È·Ê¿ÅÄƔ¾¿É¼ËĹʿÅŷĸ»ÊËÈÄÅÄƭÅŮ¿ÄÉ»ÊÃź»Ɣ
• Press any key except
[PTT]
to turn on LCD and keypad
backlight.
• The backlight is automatically turned off after 5 seconds
without operation.
■
Key Lock
The Key Lock Function locks all keys except
[ ]
,
[PTT]
,
[VOL/SQL]
and
[LOCK]
to avoid accidental operation of
channel switch.
• Hold
[LOCK]
¼ÅÈʸÉ»¹ÅĺÊÅÊËÈÄÅÄƭÅŮʾ¿É¼ËĹʿÅÄƔ
■
Vibration Water Draining Function
The Vibration Water Draining Function helps to drain the wa-
ter away from the loudspeaker housing. It can prevent water
ingress to affect the loudspeaker voice quality. The radio
emits a vibrating sound when this function is activated.
• Press and hold
[SCAN]
and
[Hi/Lo]
at the same time to ac-
tivate.
• A deep sound emits for 10 seconds to drain water.
• Any key operation is invalid when vibration water draining is
activated.
SCAN OPERATION
■
Scan Types
The Scan Types including normal scan and priority scan, can
be selected in the set mode (Please refer to set mode opera-
tion).
The weather channel will be scanned also if the weather alert
function is activated.
Set TAG channels before scanning. Cancel TAG for channels
not need to be scanned.
Normal scan:
Scan TAG channels. Channel 16 won’t be
scanned if it is not set as TAG channel.
Priority scan:
Scan Channel 16 during normal scan.
Normal Scan
Priority Scan
■
Set TAG Channels
»ÊƺЄƻ¼Åȹ¾·ÄÄ»ÂÉÄ»»ºÊŸ»É¹·ÄÄ»ºƔ·Ä¹»Â
ƺЄƻ;¿¹¾¿ÉÄÅÄ»»ºƔ¾»ËÄÊ·½½»º¹¾·ÄÄ»ÂÉͿ¸»ÉÁ¿ÆÆ»º
during the scan period.
D
Set/Cancel Single TAG Channels
1.
Press
[U/I/C]
to select channel group.
2.
Press
[
Y
]
or
[
Z
]
to select the desired TAG channel.
3.
Hold
[FAV/TAG]
for 1 second to set the current channel
as TAG channel.
•
ơЄƢ·ÆÆ»·ÈÉÅÄƔ
4.
Hold
[FAV/TAG]
again for 1 second to cancel the TAG
channel.
• “
Є
” disappears on LCD.
D
Set/Cancel All TAG Channels
1.
ÅÍ»ÈÅŮƔź
[FAV/TAG]
and press
[ ]
to power on.
All TAG channels will be canceled in the selected channel
group.
2.
Repeat the above operation to set all channels as TAG
channels.
■
Scan Operation
Set scan resume timer in the set mode.
1.
Press
[SCAN]
to start normal scan or priority scan.
• “
SCAN
ƢŲ·É¾»ÉÅÄƔ
• “
16
” appears on the sub channel readout during priority
scan.
• The scan pauses when a signal is received (The resume
time can be set in the set mode).
• Channel 16 is monitored in priority scan.
• Press
[
Y
]
or
[
Z
]
to change the scan direction.
2.
Press
[SCAN]
to stop scanning. Or press
[PTT]
,
[C/16]
,
[CH/WX]
and
[U/I/C]
to stop.