5
6
ICON
DESCRIPTION
INT
Select International Channel.
CAN
Select Canadian Channel.
Appear while channel is busy.
Flash while in Scan Channel.
Appear when TAG Channel is selected.
CALL
Appear when Call Channel is selected.
Battery indicator.
Indicate piecewise while charging.
Flash while full charging.
SCAN
Flash while scanning.
Appear while key locked.
DUP
Appear while a duplex channel is selected.
DUAL
Appear while dual watch.
TRI
Appear while tri-watch.
ICON
DESCRIPTION
Indicate the operating channel number.
Indicate the selected condition in set mode.
Indicate assistant channel.
Appear while setting volume.
Appear while setting squelch.
Appear while setting mode.
Appear while weather alarm.
WX
Appear while weather channel is selected.
BASIC OPERATION
■
Power ON/OFF
1.
Hold
[ ]
for 2 seconds to power on.
2.
Hold
[ ]
·½·¿Ä¼ÅÈʸÉ»¹ÅĺÊÅÆÅÍ»ÈÅŮƔ
■
Adjust the Volume Level
The volume level can be adjusted through
[VOL/SQL]
and
[
Y
]
/
[
Z
]
.
1.
Press
[VOL/SQL]
and then press
[
Y
]
/
[
Z
]
to adjust the
volume level.
• The “
VOL
ƢŲ·É¾»ÉƔ
• There are 31 volume levels. OF means the volume is
ÊËÈÄ»ºÅŮƔ
• When no operation is performed within 5 seconds, the
radio returns to normal mode.
2.
Press
[VOL/SQL]
again to exit the volume adjustment
mode.
■
Adjust the Squelch Level
The squelch level can be adjusted through
[VOL/SQL]
and
[
Y
]
/
[
Z
]
. Set the proper squelch level to have better receive
É¿½Ä·Â·Äº»Ů»¹ÊË·Âɹ·ÄƔ
1.
Press
[VOL/SQL]
for twice and then press
[
Y
]
/
[
Z
]
to ad-
just squelch level.
• “
SQL
ƢŲ·É¾»ÉƔ
• The radio has 11 squelch levels. OP is completely open.
10 is maximum squelch.
• When no operation is performed within 5 seconds, the
radio returns to the normal mode.
2.
Press
[VOL/SQL]
again to exit squelch level adjustment
mode.
■
Transmit and Receive
D
Transmit
1.
Press
[Hi/Lo]
to select transmit power.
• “
LOW
” appears when low power is selected.
• Select low power for short distance communication
while high power for long distance communication.
• Some channels are for low power transmit only.
2.
Press and hold
[PTT]
to transmit. Then speak to micro-
phone.
• “
” appears.
• Channel 70 cannot be used for normal transmission.
3.
Release
[PTT]
to receive.
NOTE:
• Transmitting without antenna will damage the radio.
• To forbid the long time continuing transmit, please turn on
TOT Function through PC progr
amming software.
• Hold the microphone 5-10cm from your mouth while talking.
D
Receive
1.
Enter volume adjustment mode. Press
[
Y
]
or
[
Z
]
to ad-
just.