14
LCD Reminders
When your ReSPR FLEX unit is in need of maintenance,
a message will display on the LCD screen. To reset any
maintenance reminder on the unit, press the NORMAL/HIGH
button for 3 seconds to eliminate the message.
•
Perform Cleaning
– this message will display every 30 days. Check
to see if the front grill of the unit is dusty. If so, you will need to
clean the filter as described in the Routine Maintenance section
on page 12. You can eliminate this message after cleaning, by
pressing the NORMAL/HIGH button for 3 seconds
•
Replace NCC Cell
– This message displays when the NCC Cell
has reached the end of its useful life and needs to be replaced.
To order a replacement, contact your distributor or ReSPR
Technologies (
www.resprtech.com
). Follow the instructions
included with your replacement part to replace your Purification
Plate.
A message will
display on the LCD
screen when your
ReSPR FLEX
units
needs maintenance.
