12
Routine Maintenance
To run efficiently, your ReSPR FLEX requires cleaning on a 60 to 90 day
cycle. Every month the display will remind you to clean the unit. The
best way to tell if the Filter Assembly needs to be cleaned is to check
the front grill for dust. If the front grill is dusty, you should remove and
clean the Filter Assembly. If the front grill is not dusty, you can press the
Normal/High button for 3 seconds and you will be reminded again in 30
days.
To remove and clean the Filter Assembly you will need a
#2 Phillips screwdriver.
Removing the Rear Cover
1. Turn off the unit with the Power button.
2. Unplug the unit from the power source and then remove
the power cord from the back of the unit.
3. Unscrew and remove the Rear Cover screw located above
the Power Cord Port.
4. Slide the rear cover upwards and pull it out
5. Wipe the rear cover with a damp cloth and set to the side.
Removing and Cleaning the Filter Assembly
1. Unit should be powered OFF and Power Cord should
be disconnected when Cleaning/Disassembling/
Reassembling/Servicing.
2. Grasp the top of the Filter, lift slightly and pull it away
from the unit.
3. Thoroughly rinse the filter with warm water. Shake
excess water from the filter and let it dry for an hour
before reattaching it.
