Response CWK6, Инструкция по установке и эксплуатации

Страница: 15 / 48

15
4. Adjust the camera head viewing position as required and tighten all screws. You
can make adjustments to the required viewing position as shown (Fig. 8).
5.3.2 Connection
Connect between “VIDEO IN” of your DVR and the “VIDEO OUT” of the camera(s) with
the video extension cable(s) supplied. Use the 5 way splitter cable assembly already
connected to the DVR’s power adaptor to power each dome camera (operating cameras
on 12VDC voltage only).
Fig. 7.
Loosen screw to adjust tilt
position of Camera and
tighten when complete
Loosen screw to adjust pan position of
Camera and tighten when complete
Fig. 8.
Video outputs from
Camera to DVR
VIDEO INPUT
"VIDEO IN" on DVR
"VIDEO OUT" on Camera(s)
DVR's Power Supply
Adaptor output
CH1 CH2 CH3 CH4
Mains Power Supply to
Heavy Duty Camera(s)
1 to 5 way Power
Splitter Cable
(2 power plugs
available not used)
Power to DVR
IP56 IP56
12VDC Power Supply to
Dome Camera(s)
WEATHERPROOF
SOCKETS