12
Note: If
this DVR is used with the Wireless Colour Camera CCTV Kit (CWFK1), the video
output from the receiver can be connected to either channel 1, channel 2, channel 3 or
channel 4, to view the wireless camera.
5.4 Mouse Connection
Connect the P
S/2 mouse to the port shown on the DVR. Note the
PS/2 mouse must be connected to DVR before it is powered up.
5.5 D
VR Power Connection
Connect the po
wer adaptor's output plug into the DVR to power the DVR. Connect the
power adaptor’s mains lead into the adaptor and plug into the mains (240VAC) wall socket
and switch ON.
The DVR will boot up.
The screen shown in Fig. 5.01 will be
displayed during boot up.
After the system has booted up, the DVR
will display the monitor in quad mode.
PS/2 Mouse Port
Fig
. 5.01
