Respironics BiPAPautoSV Advanced, Руководство пользователя, Страница: 25 / 48

User Manual
21
6.2 C
HANGING THE
D
EVICE
S
ETTINGS
You can view the following settings and indicators on the display screen:
• Measured pressure
• Backlight settings
• Humidifi er, SmartCard and Ramp status
• Patient alarms
• Measured parameters (Leak, Respiratory Rate, Minute Ventilation, Exhaled Tidal Volume)
Additionally, you can view and modify the following settings using the display screens:
• Humidifi er (heat)
• FLEX Setting
• Rise Time
• Ramp start pressure
• LED backlight
NOTE: When changing any setting (except for the Ramp Start Pressure setting), once a maximum
setting is reached, the setting rolls back over to the minimum setting, and likewise, once a
minimum setting is reached, it rolls back over to the maximum setting provided.
For example, the minimum humidifi er setting is 1 and the maximum is 5 . Once the humidifi er
setting is increased to 5 , if you press the
HEAT
button again, the setting will go back to 1 . Or,
once the humidifi er setting is decreased to 1 , if you press the
RAMP
button again, the setting will
go back to 5 .
6.2.1 C
HANGING THE
H
UMIDIFIER
S
ETTING
If you are using the REMstar Heated Humidifi er with your device, you can adjust the humidifi er heat
setting by completing the following steps:
1. From either the Standby or Monitoring screen, press and hold the
HEAT
button for several seconds. Th e
Humidifi er Setting screen appears, as shown in Figure 6–6.
Figure 6–6 Humidifi er Setting Screen
2. Press the
HEAT
button to increase the humidifi er setting, or press the
RAMP
button to decrease the setting.
You can adjust the setting from 1 to 5. Th e change takes eff ect immediately as you adjust the setting.