E-19
CHAPTER 6
CARE AND
MAINTENANCE
Photo catalytic Filter and UV Lamps
Photo catalytic filter
Photo catalytic filter is permanent, never needs replacing. When there is
dust on it, clean the dust off using a vacuum cleaner dusting brush. Do
not wash it in water.
UV lamps
• When the
REPLACE UV LAMPS
indicator light on the control panel
flashes, it is time to replace the UV lamps.
• Removing the UV light blocker, gently rotate the lamp a quarter turn in
either direction until it unlocks from the socket.
6-5 Replace the activated
carbon filter
If the air quality is extremely poor,
you may replace the activated
carbon filter before the REPLACE
CARBON FILTER indicator light
flashes. The activated carbon filter
is located behind the electronic cell.
6-6 Replace the UV Lamps
After removing the UV light
blocker, rotate the lamp to
unlock it from the socket.
WARNING:
•
Never look directly at UV
lamp .
•
Direct exposure to germicidal
light can cause temporary or
chronic damage to your
eyesight, or even blindness.
•
Always unplug the unit
before cleaning, servicing or
replacing the UV lamp.
Replacing the Activated Carbon Filter
When the
REPLACE CARBON FILTER
indicator light flashes, the
activated carbon filter needs to be replaced.
•
Stop the operation and unplug the unit.
• Please wait
5-10
seconds before opening the front panel.
• Remove the old activated carbon filter from the filter cabinet and insert
a new one.
Reset the REPLACE CARBON FILTER indicator light
After replacing the activated carbon filter, hold the POWER button down
on the control panel 3 seconds or press the RESET button on the
remote control 3 times to reset the indicator light.
WARNING:
• DO NOT reuse or clean
the activated carbon filter
with liquid, especially
alcohol, gasoline, paint
thinner, etc. It may cause
fire!
• DO NOT try to place the
activated carbon filter in
front of the cell! It may
cause fire!
Note:
Remove plastic packaging
from the activated carbon
filter before operation.
