E-15
OPERATION
CHAPTER 5
Setting New Functions
The unit buttons offers access to a number of functions:
Setting new functions
2. Cell Clean Dry Function
• Stop the unit operation and hold down the SPEED button until you
hear a beep sound to set up the Cell Clean Dry function mode.
• In this mode, the unit electronic cell does not charge for 45 minutes
allowing time to dry the cell.
• After running 45 minutes, the cell will automatically charge and start
to work.
3. Change the Button Melody
• Stop the unit operation and hold down the UV LAMP and NEG. ION
buttons at the same time until you hear the new melody.
• If you want to go back to the default melody, do the reverse.
Note:
This function is helpful
for drying the cell thoroughly
after cleaning.
1. Timer Cycle Function
Setp1. Power off the unit.
Step2. Hold the TIMER button for 3 seconds until the "8 hour" indicator
light comes on.
Step3. Press the TIMER button one time and wait for all the timer lights
flash.
Step4. Press the POWER button
Step5. Press the POWER button to operate the unit.
Step6. Press the TIMER button again. This time all the indicator lights will
be on.
In this case the unit will start to work 2 hours and stops 2 hours
automatically
If you want to return to the default mode, do the reverse.
Indicator lights
flash
All the TIMER
indicator lights flash
4h
8h
12h
4h
8h
12h
5-1 Default mode
5-2 Timer cycle mode
TIMER
TIMER
