E-13
E-12
CHAPTER 3
Part Numbers
Part Names
PART NUMBER
AND NAME
210203 Plastic front panel
200518 Front panel magnet
201911 Pre-filter
201907 Electronic cell
201910 Activated carbon filter
210102 Filter case
210202 Upper panel
210106 Fan motor bottom plate
201506 Unit power contact plate
201801 Unit epoxy resin board
200305 Power supply
210309 Power supply transformer
210112 Circuit board protector
210301 Main circuit board
210308 Main circuit board
transformer
200501
Caster
210103 Bottom plate
210305 Interlock switch
CHAPTER 4
FEATURES AND
SPECIFICATIONS
Multi-Stage Filters
The unit utilizes a two-stage electrostatic precipitator (Electronic cell)
combined with a Pre-filter (For large particles), an Activated carbon filter
(For odors and gases), UV germicidal light (Killing airborne pathogen),
a Photo catalytic filter (Removes VOC's) and a Negative ion generator.
Automatic Function
The odor sensor automatically selects the appropriate fan speed
depending on the air quality detected.
Carbon Filter, UV Lamps Replacement and Cell Cleaning
Indicator Lights
The REPLACE CARBON FILTER, REPLACE UV LAMPS indicator lights
tell you when to replace the activated carbon filter or the UV lamps.
Also, the CLEAN CELL indicator light tells you when to clean the
electronic cell.
Safety Micro-Switch (Interlock switch)
This air purifier is equipped with a safety interlock switch (Micro-safety
switch) that will turn the unit off if the front panel is opened while the unit
is running.
Easy Maintenance and Low Cost
When the electronic cell needs to be washed or the filters need to be
replaced, simply open the front panel and pull out the electronic cell or
old filters and put the new or clean one in.
No screws, hooks or tools are required. The electronic cell captures small
particles on aluminum plates that are simply rinsed off in the sink.
Features
Product
Specifications
Model No.
Power Requirement
Rated Power
Fan Motor
Noise Level
Negative Ion
UV Lamp
Dimensions
Weight
R400T (RespirAide 400T)
120V, 60Hz, 1A
96W
120V, 60Hz
<55dB
3x10
6
/cm
3
6Wx2
H83.5cmxW47.8cmxD23.8cm
23.8kg
Specifications
Standby Power
In order to operate the electrical circuits while the power plug is
inserted in the wall outlet, this product consumes about 5.8W of
standby power. For energy conservation, unplug the power cord when
the unit is not in use.
210302
200518
210203
201926
201907
210202
210102
210106
200312
200302
201910
201506
201801
200305
210112
210301
201320
200501
201321
210305 210103
210801
210101
202522
210211
201203
201505
210105
201202
201306
210104
210501
201303
210201
210206
210205
210101 Unit housing
200312 UV lamp
200302 UV lamp holder & ballast
202522 Photo catalyst
210211 Unit Handle
201306 Fan Motor
201202 Fan housing
201203 Fan blade
201505 Fan motor side plate
210105 Fan motor top plate
210104 Outlet screen holder
210501 Outlet screen
210201 Plastic top cover
210302 Display circuit board
201303 Odor sensor
210801 Silica gel button lining
210205 Power button-square type
210206 Button-rectangle type