Reson SeaBat 7125 SV2, Руководство оператора

Страница: 98 / 212

SYSTEM OPERATION
SeaBat 7125 SV2 Operator‟s Manual
Page 82 July 25, 2011
Version 3
Display Points / Filters: Select the items to display in the wedge display.
o
Bathy: Display bathymetry points.
o
Gates: Display gates/filter lines.
o
Rejected Items
13
: Display points that do not pass the quality filtering.
Bathy Point Color: Change the color of the bathymetry points in the wedge
display or display the color-coded bottom detection method or quality or
uncertainty reporting.
o
Red, Yellow, Green, Blue, or White: Dots will appear on the screen in
the selected color.
o
Process: Each sounding is color-coded based on the weighting used in
the magnitude/phase bottom detection process.

Blue: Magnitude

Green: Phase

Orange: Magnitude and Phase blend
o
Quality: Uses a two-part test for brightness and colinearity with color-
coded results. For further details, see section 7.4 Quality .

Green: Good brightness, good colinearity

Yellow: Poor brightness, good colinearity

Orange: Good brightness, poor colinearity

Red: Poor brightness, poor colinearity
o
Uncertainty
14
: Uses a Green-Yellow-Orange-Red
transition palette to display uncertainty. Green indicates
the lowest uncertainty and red the highest. For further
details, see
section 7.5 Uncertainty Estimation .
Filter Line Color: Change the color of the filter lines in the wedge display.
Palette: Change the color scheme applied to the Primary Display.
Line Color: Change the color of the frames and gridlines in both the sonar
image and A-scan displays.
Text Color: Change the color of the text in both the sonar image and A-scan
displays.
Display Format: Switch the sonar image display between Wedge and Beam
(B-scan) modes.
Label Format: Change the labels in both the sonar image and A-scan
displays to reflect units of range (in meters), time (in seconds), or samples.
Grid Lines: Activate or deactivate grid lines on the Primary Display.
o
All: Show the frame around the sonar image, as well as the selected
units of measure.
13
Right-clicking the wedge display and selecting Show Rejected from the menu will do the same.
14
Available with the Efficiency feature package (see Table 19 ).