en
Installation
Data expor
t /
configuration
Eliminating er
rors
Configuration
W
eb interface
21
Indications
1
112mm
2
6
3
7
5
4
3.2 Electrical connection
Carry out the connection of the device
to the controller / other mod-
ules in the order described below:
Î
Connect the data cable (RESOL VBus
®
,
) to the RESOL controller
. If nec-
essary, extend the cable using the terminal block included and a common two-
wire cable.
Î
Connect the mains adapter
to the mains socket.
Î
For a direct connection to a router, connect the device to a router
using the
network cable (included with the KM1,
).
VBus
www
3.1 Mounting
Note
Strong electromagnetic fields can impair the function of the device.
Î
Make sure the device as well as the system are not exposed to strong
electromagnetic fields.
The unit must only be located in dry interior rooms.
In order to prevent disturbances caused by electromagnetic fields, pay attention to
separate routing of mains cables and bus cables.
1
112mm
2
6
3
7
5
4
3.2