ResMed stellar series, Руководство пользователя

Страница: 33 / 41

30
Technical specifications
Operating pressure
range
•
IPAP: 2 cm H
2
O to 40 cm H
2
O (in S, ST, T, PAC mode)
•
PS: 0 cm H
2
O to 38 cm H
2
O (in S, ST, T, PAC mode)
•
EPAP: 2 cm H
2
O to 25 cm H
2
O (in S, ST, T, iVAPS, PAC
mode)
•
CPAP: 4 cm H
2
O to 20 cm H
2
O (in CPAP mode only)
•
Min PS: 0 cm H
2
O to 20 cm H
2
O (in iVAPS mode)
•
Max PS: 0 cm H
2
O to 30 cm H
2
O; 8 cm H
2
O to
30 cm H
2
O when AutoEPAP is on (in iVAPS mode)
•
Min EPAP/Max EPAP: 2 cm H
2
O to 25 cm H
2
O (in
iVAPS mode when AutoEPAP is set to on)
Note:
iVAPS mode is only available in Stellar 150.
Maximum single fault
pressure 60 cm H
2
O (in all modes)
Maximum breathing
resistance under single
fault 2 cm H
2
O at 30 L/min;
7.2 cm H
2
O at 60 L/min
Maximum flow > 200 L/min at 20 cm H
2
O
Flow accuracy ± 5 L/min or 20% measured value, whichever is greater
Test condition: T mode, IPAP: 40 cm H
2
O, EPAP: 2 cm
H
2
O, Rise Time: MIN, Fall Time: MIN, Ti: 4.0 sec,
Respiratory Rate: 10 bpm, with ResMed calibration cap.
Therapy pressure
tolerance IPAP: ± 0.5 cm H
2
O ± 10% of set pressure (end of
inspiration)
EPAP/PEEP: ± 0.5 cm H
2
O ± 4% of set pressure
CPAP: ± 0.5 cm H
2
O ± 10% of set pressure
Test condition: T mode, IPAP: 40 cm H
2
O, EPAP: 2 cm
H
2
O, Rise Time: MIN, Fall Time: MIN, Ti: 4.0 sec,
Respiratory Rate: 10 bpm, with ResMed calibration cap.
Sound pressure level 31 dBA with uncertainty of 3 dBA as measured according
to ISO 17510 – 1:2007.
Sound power level 39 dBA with uncertainty of 3 dBA as measured according
to ISO 17510 – 1:2007.
Alarm Volume Range High, medium and low priority alarm (measured according
to IEC 60601-1-8: 2012):
minimum 41 dB
maximum 67 dB
Dimensions (L x W x H) 230 mm x 170 mm x 120 mm
Weight 2.1 kg
LCD screen Dimension (L x W x H): 76.9 mm x 63.9 mm x 3.15 mm
Resolution: 320 x 240 pixels
Air outlet 22 mm taper, compatible with ISO 5356-1:2004
Anaesthetic & Respiratory Equipment - Conical
Connectors
Pressure measurement Internally mounted pressure transducer
Flow measurement Internally mounted flow transducer
Power supply AC 100–240V, 50–60Hz, 2.2 A, max. 65 W
External DC Power
Supply (isolated) 24 V, 3 A