ResMed AirSense S10, Клиническое руководство

Страница: 19 / 44

16
Set Pressure Sets the fixed treatment
pressure.


4–20 cm H
2
O, 0.2 cm H
2
O
increments
Mask Select the type of mask used by
the patient. Refer to Mask Device
Compatibility List on
www.resmed.com.
  
Full Face / Nasal / Pillows
Comfort
Parameter Description Mode Range
AutoSet AutoSet
for Her
CPAP
Ramp Time If Auto is selected, the device
will detect sleep onset and
automatically rise to the
prescribed treatment pressure.
  
Off / 5–45 mins / Auto
Start
Pressure Set the pressure at the start of
ramp, up to treatment pressure.
  
4–Set pressure, 0.2 cm H
2
O
increments
EPR Enable / disable EPR.
  
On / Off
EPR Type Available when EPR is enabled.
  
Full Time / Ramp Only
EPR Level Set the EPR value.
  
1 / 2 / 3 cm H
2
O
Climate Ctrl Available when water tub is used
and ClimateLineAir heated air
tubing is connected.
  
Manual / Auto
Tube Temp. Set the minimum temperature of
air delivered by heated air tubing
such as ClimateLineAir.
  
Off / 60–86°F (16–30°C),
1° increments
Humidity
Level Set the humidity level.
  
Off / 1–8
Accessories
Parameter Description Range
Tube Select the type of air tubing used by the patient. ClimateLineAir air tubing
is automatically detected when connected to the device. SlimLine / Standard
AB filter Select Yes if you attach an antibacterial filter. No / Yes
View
oximeter Displayed at all times when an oximeter is connected. 0-300 hrs
0-100% SpO
2