18
Starting therapy
1.
Direct the patient to fit their mask.
2.
Direct the patient to press Start/Stop, or if the SmartStart feature is enabled, direct them to
breathe into their mask.
Therapy will begin and the
Sleep Report
screen is displayed.
The current treatment pressure is shown in green.
During ramp time the pressure is gradually increasing and you will see a
spinning circle. Once the prescribed treatment pressure is reached, the entire
circle will be green.
The screen will go black automatically after a short period of time. You can press Home or the dial to
turn it back on. If power is interrupted during therapy, the device will automatically restart therapy
when power is restored.
The AirSense 10 device has a light sensor that adjusts the screen brightness based on the light in
the room.
Stopping therapy
1.
Direct the patient to remove the mask.
2.
Direct the patient to press Start/Stop, or if SmartStart is enabled, therapy will stop automatically
after a few seconds.
The
Sleep Report
now provides a summary of the therapy session.
Viewing the Sleep Report
The
Sleep Report
screen shows sleep quality and mask seal status for the most recent therapy
session. Turn the dial to scroll down to view more detailed usage data. The parameters displayed
will depend on the therapy mode.
Содержание AirSense S10
Страница 1: ...Clinical guide English ...
