resi-linx HD-4001 digi-mod Скачать руководство пользователя

Страница: 19 / 20

HD-4001DM User Guide and Install Manual

Page 19

EAS

This device may be equipped EAS Terminals/connections and CVBS (Video Input) and L/R audio input

connections on the rear panel.

If applicable, connect your EAS Alert Device System outputs to the Encoder.

If the encoder receives the proper Event signal from your EAS device, the normal input audio/video

would be replaced by the audio and video from the EAS system device. Once the encoder has received

the proper signal from your EAS device the normal input video and audio would return to a normal

operating mode.

****THIS DEVICE IS NOT AN EAS RECEIVER****

Note: It is the responsibility of the Installer/User to properly connect, verify, and test

the EAS functionality of this device with the EAS receiver.

Note: It is the responsibility of the Installer/User to properly perform the required

EAS tests as required by the FCC or your specific Government Agency.

If the EAS functions on this device fail for any reason it is the responsibility of the

user/integrator to replace this device as required by the FCC or your specific

Government Agency.

Product Notes:

Item

Value

Password
Serial Number
Installation Date
Purchase Date
Video Input 1
Video Input 2
Video Input 3
Video Input 4

Содержание HD-4001 digi-mod





















Результаты поиска

Содержание HD-4001 digi-mod

Отзывы:

Похожие инструкции для HD-4001 digi-mod

Бренды по названию

Популярные бренды

resi-linx HD-4001 digi-mod, Руководство пользователя и инструкция по установке

Результаты поиска

Содержание HD-4001 digi-mod

Отзывы:

Похожие инструкции для HD-4001 digi-mod

Бренды по названию

Популярные бренды