resi-linx HD-4001 digi-mod, Руководство пользователя и инструкция по установке

Страница: 15 / 20

HD-4001DM User Guide and Install Manual
Page 15
Common Setup Menu


Output Channel
– Use the Scroll Up/Down button to change the output channel. Use the
Scroll Up/Down buttons to select the desired output channel. Once the desired output
channel is selected press the OK button to set the channel.
The LCD Display will show both the channel number and the frequency number of the
output channel (example: 21 480.5000MHz)
Note: The RF2 Channel Physical output is determined by the selection of output channel of RF1
The Quad Encoder prevents you from selecting the last channel in the device. **See page
9 of this manual for more information on this topic


Attenuation – Use the Scroll Up/Down button to select Attenuation. Press the OK button
to enter the Attenuation menu. Use the Scroll/Up down button to select the desired
attenuation in 1dB increments from 0 to minus 20 dB. Once the desired attenuation level is
found press the OK button to set.


LCN – Use the Scroll Up/Down button to select LCN MODE. Press the OK button to
enter the LCN menu. Menu options are APN, NORDIG, ITC, and EACEM. Factory
default: APN . Use the Scroll Up/Down button to select the desired LCN and press the OK
button to set.


Device Address – Use the Scroll Up/Down button to select Device Address. Press the OK
button to enter the Device Address menu. Use the Scroll Up/Down to select the Desired
Address ranging from 1 to 255 then press OK to set. A unique device address is required if
setting up more than 1 encoder per site. This allows the user to distinguish each device.


Default Configuration –To reset the Encoder/Modulator back to the factory default select
the Default Configuration Menu. Press OK to enter the Default Configuration Menu.
Using the Up/Down button select YES to reset all programmed settings back to the factory
default setting. Factory Default: NO.
Caution: Once the “YES” button is pressed the unit will automatically reset to the factory default
settings. All settings or changes to the encoder/modulator will be lost.


Back to Main- Select Back to Main to escape the Common Setup Menu.
RF Setup Menu


Select RF - Press the OK button to enter the Select RF menu. Use the Scroll Up/Down
button to Select the RF section of the Encoder. Select 1 or Select 2.
The Single and Dual versions of this product will have Select 1 only.

Constellation – Use the Scroll Up/Down button to select Constellation. Press the OK
button to enter the Constellation menu. Select the desired Constellation / QAM setting then
press the OK button to set.


RF SETUP 1
SELECT RF